Thermodynamics Practice Problems: Heat, Work, and the First Law
thermodynamicsheatworkinternal energyideal gasesPV diagrams

Thermodynamics Practice Problems: Heat, Work, and the First Law

SStudyPhysics Editorial Team
2026-11-20
7 min read

Solve thermodynamics problems with a clear checklist for heat, work, internal energy, ideal gases, phase changes, and PV diagrams.

Thermodynamics problems become more manageable when you separate the process into system, energy transfer, sign convention, and equation choice. This guide provides a reusable checklist for heating, expansion, compression, ideal-gas changes, phase changes, and PV-diagram questions, followed by step-by-step examples and checks for catching common errors before you submit an answer or finish an exam.

Overview

Most introductory thermodynamics questions use the first law of thermodynamics:

ΔU = Q − W

Here, ΔU is the change in internal energy of the system, Q is heat transferred into the system, and W is work done by the system. This convention is common in physics courses. Under it, heat entering the system is positive, heat leaving is negative, work done by an expanding system is positive, and work done on a compressed system is negative.

Some textbooks instead write the first law as ΔU = Q + W, where W means work done on the system. Neither convention is inherently incorrect, but mixing them in one solution produces a wrong result. Write your course's convention at the top of the page before substituting values.

For an ideal gas, internal energy depends only on temperature. Therefore:

ΔU = nCVΔT

where n is the amount of gas in moles, CV is the molar heat capacity at constant volume, and ΔT = Tf − Ti. The ideal gas law connects pressure, volume, temperature, and amount of gas:

PV = nRT

Use absolute temperature in kelvins for gas-law calculations. The work done during a constant-pressure expansion or compression is:

W = PΔV = P(Vf − Vi)

For a changing pressure, work is represented by the area under the curve on a pressure-volume diagram:

W = ∫P dV

These equations form the core of many thermodynamics practice questions. For related energy reasoning, compare this guide with the step-by-step guide to work and conservation of energy.

Checklist by scenario

1. Heating or cooling without a phase change

  1. Identify the material and whether the problem gives mass-based specific heat or molar heat capacity.
  2. Convert temperatures consistently. A temperature difference has the same numerical size in Celsius and kelvins, but gas laws require kelvins for absolute temperature.
  3. Use Q = mcΔT for a known mass and specific heat, or Q = nCΔT when using molar heat capacity.
  4. Assign the sign from the temperature change: warming gives positive heat for the object; cooling gives negative heat.
  5. If the container does no work, such as a rigid sealed container, then W = 0 and the first law gives ΔU = Q.

2. Constant-pressure expansion or compression

  1. Find the volume change: ΔV = Vf − Vi.
  2. Use W = PΔV if pressure is constant.
  3. Expansion means ΔV > 0, so work done by the gas is positive. Compression means ΔV < 0, so work done by the gas is negative.
  4. Calculate the internal-energy change from the temperature change or the appropriate heat capacity.
  5. Apply Q = ΔU + W, which is the rearranged form of ΔU = Q − W.

3. Constant-volume process

A rigid container has no volume change, so the boundary work is zero. The first law simplifies to Q = ΔU. For an ideal gas, use the initial and final temperatures to determine the internal-energy change. If pressure changes in a rigid container, the ideal gas law can help find the unknown temperature or pressure.

4. Ideal-gas law practice problems

When the amount of gas remains fixed, compare two states with:

PiVi/Ti = PfVf/Tf

Use kelvins, keep pressure units consistent, and check whether the process is constant pressure, constant volume, or constant temperature. For an isothermal ideal-gas process, temperature and internal energy remain constant, so ΔU = 0 and the first law requires Q = W under the convention used here.

5. Phase-change scenarios

During melting, boiling, freezing, or condensation, temperature can remain constant while energy is transferred. Use Q = mL, where L is the relevant latent heat. Do not use Q = mcΔT across the phase-change interval because ΔT = 0 there. If a problem includes warming before or after the phase change, divide it into stages and calculate each stage separately before adding the energies.

6. PV-diagram questions

Read volume on the horizontal axis and pressure on the vertical axis. A path moving to the right represents expansion and positive work by the gas; a path moving left represents compression and negative work. The work is the area under the process path, not simply the rectangle formed by the endpoint values unless pressure is constant. For a closed cycle, net work equals the enclosed area, with the sign determined by the direction around the cycle.

Worked examples

Example: constant-pressure expansion

An ideal gas expands from 0.020 m3 to 0.050 m3 at a constant pressure of 100,000 Pa. Its internal energy increases by 1,200 J. Find the work and heat added.

First calculate the volume change:

ΔV = 0.050 − 0.020 = 0.030 m3

Then calculate the work:

W = PΔV = (100,000 Pa)(0.030 m3) = 3,000 J

Use the first law:

Q = ΔU + W = 1,200 J + 3,000 J = 4,200 J

The positive result means 4,200 J of heat enters the gas. Notice that some of that energy increases internal energy while the rest leaves as work done during expansion.

Example: phase change followed by warming

Suppose a mass first melts and then warms as a liquid. Treat the process as two separate energy transfers:

Qtotal = mLf + mcliquidΔT

Use the latent heat term for the constant-temperature melting stage, then use the specific-heat term for the temperature increase. This staged approach prevents you from incorrectly applying one formula to the entire process.

What to double-check

  • System definition: State whether the system is the gas, a container, a substance, or a combined object.
  • Sign convention: Confirm whether positive work means work done by the system or work done on it.
  • Units: Convert liters to cubic meters when using pascals, because 1 Pa·m3 equals 1 J. Keep energy units consistent.
  • Temperature: Use kelvins for absolute gas-law relationships. For a difference, Celsius and kelvin intervals have equal size.
  • Process description: Identify what stays constant. “Rigid” usually indicates constant volume; “isothermal” indicates constant temperature; “constant pressure” determines the work formula.
  • Energy accounting: Check that the signs in ΔU = Q − W agree with the physical story. Heat entering and expansion usually make positive contributions to Q and W, respectively.
  • Reasonableness: Work should have units of joules, and a larger pressure or volume change should generally produce more work.

Common mistakes

A frequent error is treating heat as something an object “contains.” Heat is energy transferred because of a temperature difference; internal energy is the energy associated with the system's microscopic state. Another mistake is assuming that every temperature change requires the same heat equation. Specific heat applies during temperature changes within one phase, while latent heat applies during a phase change.

Students also often use endpoint pressure and volume to calculate work even when the PV path is not constant pressure. Sketching the path and estimating the area can clarify which expression is appropriate. Finally, do not assume that an ideal gas has constant internal energy merely because its pressure or volume is constant. For an ideal gas, internal energy is tied to temperature, so determine ΔT first.

If a problem combines several topics, break it into stages rather than searching for one formula. A useful written format is: known quantities, process condition, sign convention, equation, substitution, units, and physical interpretation. This structure also makes your work easier to review during physics exam preparation.

When to revisit

Return to this checklist before a thermodynamics unit test, after learning a new process type, or when your class changes notation or sign convention. It is also useful before cumulative AP or introductory college physics exams, where a question may combine the ideal gas law, the first law, a phase change, and a PV diagram.

To practice actively, cover the worked solutions and classify each new question before calculating: heating or cooling, phase change, constant volume, constant pressure, isothermal, or general PV path. Then write the first law, determine the signs, solve symbolically, and substitute numbers last. Keep a short error log of missed units, incorrect signs, and misidentified processes. Revisit that log before your next practice session and compare your work with related guides on units and dimensional analysis and reading physics graphs. This routine turns thermodynamics practice questions into a repeatable method rather than a search for isolated formulas.

Related Topics

#thermodynamics#heat#work#internal energy#ideal gases#PV diagrams
S

StudyPhysics Editorial Team

Physics Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.