Momentum and Collisions Practice Problems: Impulse, Conservation, and Data Tables
momentumcollisionsimpulseelastic collisionsinelastic collisionspractice problems

Momentum and Collisions Practice Problems: Impulse, Conservation, and Data Tables

SStudyPhysics Editorial Team
2026-11-17
7 min read

Solve momentum, impulse, and collision problems with sign conventions, conservation checks, worked examples, and a review routine.

Momentum and collision problems become much more manageable when you classify the interaction, choose a positive direction, and track momentum before and after the event. This guide provides a repeatable checklist, equation reference, worked examples for impulse, elastic and inelastic collisions, explosions, and force-time graphs, plus checkpoints for reviewing your practice over time.

Overview

Momentum describes an object's motion in a way that includes both mass and velocity. The equation is p = mv, where p is momentum in kilogram-meters per second (kg·m/s), m is mass in kilograms, and v is velocity in meters per second. Because velocity has direction, momentum is a vector. A negative momentum usually means that the object moves opposite to the direction you selected as positive.

For an isolated system, the total momentum remains constant:

total momentum before = total momentum after

In equation form, for two objects, this is:

m1v1i + m2v2i = m1v1f + m2v2f

The system is considered isolated when the net external impulse is zero or small enough to neglect during the interaction. Internal forces, such as the forces the objects exert on each other during a collision, do not change the total momentum of the system.

Collision type determines which additional information is useful:

InteractionWhat is conserved or knownCommon equation or clue
Elastic collisionMomentum and kinetic energy are conservedThe objects usually separate with different velocities
Inelastic collisionMomentum is conserved, but kinetic energy is not necessarily conservedObjects may deform, heat up, or make sound
Perfectly inelastic collisionMomentum is conservedObjects stick together and share one final velocity
Explosion or separationMomentum is conserved if external impulse is negligibleAn initially stationary system can gain equal and opposite momenta

Momentum conservation is not the same as kinetic-energy conservation. Treating every collision as elastic is one of the most common errors in momentum problems and answers.

What to track

A before-and-after checklist

  1. Define the system. State which objects are included. For a collision between two carts, the system may be both carts together.
  2. Choose a positive direction. Write “right is positive” or another clear convention before assigning signs.
  3. List known quantities. Record each mass, initial velocity, final velocity, contact time, and force if given.
  4. Use consistent units. Convert grams to kilograms and milliseconds to seconds when needed. Momentum uses kg·m/s, while impulse uses N·s; these units are equivalent.
  5. Identify the interaction. Decide whether the objects stick, separate, bounce, or begin at rest and move apart.
  6. Write the symbolic equation first. Substitute numbers only after the physical relationship is clear.
  7. Check the result. Inspect the sign, units, and whether the result is physically reasonable.

Impulse and the momentum theorem

Impulse is the change in momentum:

J = Δp = pf − pi = m(vf − vi)

If the net force is constant, impulse can also be calculated as:

J = FnetΔt

For a changing force, impulse is the area under a force-versus-time graph. A rectangular graph has area FΔt; a triangular graph has area ½(base)(height). A force-time graph therefore provides a useful way to connect a measured interaction to a change in momentum. For additional practice reading slopes and areas on graphs, see How to Read Physics Graphs.

Worked example: impulse from a force

A 0.50 kg cart initially moves at 2.0 m/s to the right. A constant net force of 3.0 N acts to the left for 0.40 s. Take right as positive.

The force is negative, so the impulse is:

J = FΔt = (−3.0 N)(0.40 s) = −1.2 N·s

The initial momentum is:

pi = mvi = (0.50 kg)(+2.0 m/s) = +1.0 kg·m/s

Use J = pf − pi:

pf = J + pi = −1.2 + 1.0 = −0.20 kg·m/s

Finally, vf = pf/m = −0.20/0.50 = −0.40 m/s. The cart reverses direction because its final velocity is negative.

Worked example: perfectly inelastic collision

A 2.0 kg cart moving at 3.0 m/s to the right collides with a 1.0 kg cart initially at rest. They stick together. Find their common final velocity.

Take right as positive. Conservation of momentum gives:

(2.0)(3.0) + (1.0)(0) = (2.0 + 1.0)vf

6.0 = 3.0vf, so vf = 2.0 m/s to the right. The final speed is less than the first cart's original speed because the moving cart transfers momentum to the stationary cart. Kinetic energy is not assumed to be conserved because the carts stick.

Worked example: explosion from rest

A 4.0 kg system initially rests on a low-friction surface. It separates into a 1.0 kg object moving at 6.0 m/s to the right and a 3.0 kg object moving in the opposite direction. Find the second object's velocity.

The initial momentum is zero, so:

0 = (1.0)(+6.0) + (3.0)v2

Therefore, v2 = −2.0 m/s. The negative sign indicates motion to the left. The momenta are equal in magnitude and opposite in direction.

Cadence and checkpoints

Momentum skills improve when you review patterns rather than only checking whether a final number matches an answer key. Use a short checkpoint after each set of physics practice problems, then repeat a broader review before a quiz, unit test, AP Physics assessment, or introductory college physics exam.

After each problem set

  • Mark whether you correctly identified the system and collision type.
  • Check every velocity sign against your direction convention.
  • Record whether the final answer has the correct units.
  • Compare momentum before and after, allowing for rounding.
  • For impulse problems, compare the area of the force-time graph with the calculated change in momentum.

Weekly or unit checkpoints

Group mistakes into categories: classification, algebra, unit conversion, graph area, vector signs, or interpretation. This is more useful than simply recording a percentage score. For example, repeated negative-sign mistakes call for a direction diagram, while repeated collision-type mistakes call for a comparison table and more symbolic setup before substitution.

Before an exam or lab analysis

Complete a mixed set without looking at formulas initially. Then use a physics formula sheet to verify equation selection, not to replace the initial reasoning. If your class includes carts, motion sensors, or force probes, compare measured initial and final momentum and note possible external impulses, measurement uncertainty, and timing limitations. The physics lab report data analysis guide can help organize that comparison.

How to interpret changes

When your answers change from one practice session to another, look for the source of the change. A larger final speed is not automatically evidence of an error; it may result from a different mass ratio, direction, or collision type.

Use these interpretation checks:

  • Total momentum: If the system is isolated, the before-and-after totals should agree within rounding or experimental uncertainty.
  • Direction: A negative result means opposite motion, not an invalid answer. Draw a quick number line if the sign is confusing.
  • Sticking objects: Use one shared final velocity, not two independent final velocities.
  • Elastic collisions: If the problem explicitly states that kinetic energy is conserved, use the kinetic-energy relationship in addition to momentum conservation.
  • Force-time data: Calculate area using the actual shape of the graph. For a curve, estimate area by dividing it into simpler shapes or using provided data points.
  • Experimental mismatch: A small difference between initial and final momentum can reflect external forces, friction, sensor resolution, or rounding. A large difference deserves a review of the system definition and units.

If the problem also involves energy, review Work and Energy Problems. If it begins with a motion description rather than a collision, the kinematics guide can help you find the velocity needed for the momentum equation.

When to revisit

Return to this guide whenever a new problem set introduces a different interaction, coordinate direction, or data format. A practical schedule is to revisit the checklist after each weekly practice session, at the start of a new momentum or impulse unit, and before major assessments. Recheck it after a lab if your class uses new equipment or changes how uncertainty is reported.

Use the following five-minute routine:

  1. Write the momentum equation from memory.
  2. Classify one collision as elastic, inelastic, perfectly inelastic, or an explosion.
  3. Solve one sign-convention problem with an object moving left.
  4. Find impulse from one force-time graph.
  5. Explain in one sentence why momentum may be conserved even when kinetic energy is not.

For continued study, connect momentum to related mechanics topics: use free-body diagrams to identify external forces, review units and dimensional analysis for error checking, and consult the rotational motion formula guide when angular momentum is introduced. Keeping a dated record of the problem type, error category, and corrected method turns this page into a reusable test-prep checklist rather than a one-time reference.

Related Topics

#momentum#collisions#impulse#elastic collisions#inelastic collisions#practice problems
S

StudyPhysics Editorial Team

Physics Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.