Rotational Motion Formula Guide: Torque, Angular Momentum, and Rolling Problems
rotational motiontorqueangular momentummoment of inertiarolling motionphysics formulas

Rotational Motion Formula Guide: Torque, Angular Momentum, and Rolling Problems

SStudyPhysics Editorial Team
2026-11-14
7 min read

Choose the right rotational-motion formula with a clear guide to torque, inertia, angular momentum, energy, and rolling problems.

Rotational-motion problems become more manageable when you choose the equation from the physical situation rather than trying to memorize every formula at once. This guide gives you a reusable checklist for torque, angular kinematics, moment of inertia, rotational energy, angular momentum, and rolling motion, with step-by-step examples and checks for units, signs, and modeling assumptions.

Overview

Most rotational-motion questions combine the same ideas used in translational mechanics. Angular displacement corresponds to position, angular velocity to velocity, angular acceleration to acceleration, torque to force, rotational inertia to mass, and angular momentum to linear momentum.

The most useful first question is: What is changing, and what is causing that change? If a force produces a twist, begin with torque. If the object’s rotation changes over time under constant angular acceleration, use angular kinematics. If the problem involves energy, compare translational and rotational kinetic energy. If external torque is negligible, conservation of angular momentum may be the shortest method. For a wheel or sphere moving along a surface, check whether rolling without slipping connects linear and angular motion.

Core rotational-motion formula reference

SituationFormulaWhat the symbols mean
Angular displacementθ = s/rθ is in radians, s is arc length, and r is radius.
Angular speedω = Δθ/Δtω measures how quickly the angle changes, in rad/s.
Angular accelerationα = Δω/Δtα measures how quickly angular velocity changes, in rad/s².
Constant-α kinematicsω = ω₀ + αtUse when angular acceleration is constant.
Constant-α displacementθ = ω₀t + ½αt²Use when initial angular velocity, time, and α are known.
Torqueτ = rF sin φφ is the angle between the radius vector and force.
Rotational Newton’s second lawΣτ = IαI is moment of inertia about the selected axis.
Rotational kinetic energyKrot = ½Iω²Use for energy stored in rotation.
Angular momentumL = IωFor a rigid body rotating about a fixed axis.
Angular impulseτΔt = ΔLUse when torque acts over a time interval.
Rolling without slippingv = rω and a = rαThese connect the center-of-mass motion to rotation.

Angles in rotational formulas should normally be expressed in radians. A full revolution is 2π radians, and one-half revolution is π radians. Convert revolutions or degrees before using equations such as θ = ωt or τ = rF sin φ.

Common moments of inertia

Moment of inertia depends on how mass is distributed relative to the axis. The same object can have different values of I if the axis changes.

  • Point mass at radius r: I = mr²
  • Thin hoop or ring about its center: I = MR²
  • Solid disk or solid cylinder about its center: I = ½MR²
  • Solid sphere about its center: I = ⅖MR²
  • Thin rod about its center: I = 1/12 ML²
  • Thin rod about one end: I = 1/3 ML²

These expressions apply only when the stated shape and axis match the problem. For more involved composite objects, add the moments of inertia of the separate parts about the same axis.

Checklist by scenario

1. When the problem gives a force and a lever arm

  1. Draw the object and mark the rotation axis or pivot.
  2. Identify the point where the force acts.
  3. Find the perpendicular distance from the axis to the force’s line of action, or use τ = rF sin φ.
  4. Assign a sign: counterclockwise is often positive and clockwise negative, but use the convention consistently.
  5. For angular acceleration, combine all torques in Στ = Iα.

Example: A 20 N force is applied tangentially to the edge of a 0.30 m disk. Because the force is perpendicular to the radius, sin φ = 1. The torque magnitude is τ = (0.30 m)(20 N) = 6.0 N·m. If the disk has I = 0.50 kg·m² and no other torque acts, α = τ/I = 6.0/0.50 = 12 rad/s².

2. When angular speed changes over a known time

Use the angular-kinematics equations only if angular acceleration is constant. List the known values for θ, θ₀, ω₀, ω, α, and t. Choose an equation containing the unknown and the quantities you know. The closest rotational analogues to ordinary kinematics are:

  • v = v₀ + at becomes ω = ω₀ + αt.
  • x = x₀ + v₀t + ½at² becomes θ = θ₀ + ω₀t + ½αt².
  • v² = v₀² + 2aΔx becomes ω² = ω₀² + 2αΔθ.

For example, if a fan starts from rest and reaches 18 rad/s in 6.0 s at constant acceleration, α = (18 − 0)/6.0 = 3.0 rad/s². Its angular displacement during that interval is θ = ½(3.0)(6.0)² = 54 rad.

3. When the problem involves energy

Start with the work-energy theorem or conservation of mechanical energy. A rotating object may have both translational and rotational kinetic energy:

Ktotal = ½Mv² + ½Iω²

For rolling without slipping, substitute ω = v/R. Then:

Ktotal = ½Mv² + ½I(v²/R²)

This is especially useful for objects descending a ramp. If friction is static and the object rolls without slipping, the friction force may exert no net work at the contact point, while still helping produce the required torque. State the energy assumptions clearly instead of automatically omitting or including friction.

4. When angular momentum is conserved

Use angular momentum conservation when the net external torque about the chosen axis is zero or negligible over the interval:

Linitial = Lfinal

For a rigid object about a fixed axis, this often becomes I₁ω₁ = I₂ω₂. If the moment of inertia decreases, angular speed increases so that the product remains constant. Choose the axis first, and verify that external torques about that axis can reasonably be ignored. If an external torque is significant, use Στ = dL/dt or the angular-impulse relationship instead.

5. When a wheel rolls without slipping

  1. Write the constraint vcm = Rω.
  2. Use acm = Rα if the speed is changing.
  3. Combine the constraint with force equations, torque equations, or energy conservation.
  4. Check whether the problem actually states or implies no slipping. If the wheel skids, v = Rω does not apply.

For a fuller treatment of torque, angular momentum, and rolling cases, use the related rotational motion problems guide.

What to double-check

  • Axis: Torque and moment of inertia are always measured about a specified axis. Changing the axis can change both the value and the direction.
  • Units: Use kilograms, meters, seconds, newtons, N·m, rad/s, and rad/s² in a consistent SI calculation. A radian is dimensionless, but retaining “rad” helps identify angular quantities.
  • Force angle: Only the component perpendicular to the radius produces torque. A force directed through the axis has zero torque.
  • Signs: Pick a positive rotational direction before writing equations. A negative α means the angular acceleration points opposite your chosen positive direction.
  • Model assumptions: Ask whether the object is rigid, whether α is constant, whether slipping occurs, and whether external torque or energy loss can be neglected.
  • Dimensional reasonableness: Torque has units of N·m, rotational energy also reduces to N·m, but they represent different physical quantities. Do not treat them as interchangeable.

For a systematic unit and equation check, review the physics units and dimensional analysis guide. A carefully labeled free-body diagram is also useful when forces and torques interact; see how to draw free-body diagrams.

Common mistakes

  • Using τ = rF every time: This works only when the force is perpendicular to the radius. Otherwise use τ = rF sin φ or the perpendicular lever arm.
  • Confusing mass with moment of inertia: Mass measures resistance to linear acceleration; I measures resistance to angular acceleration about an axis.
  • Using the wrong shape formula: A solid disk and a thin hoop with the same mass and radius do not have the same I.
  • Mixing degrees and radians: Convert the angle before using angular displacement equations.
  • Assuming rolling without slipping: The relation v = Rω is a constraint, not a universal wheel formula.
  • Conserving angular momentum automatically: Conservation requires negligible net external torque about the selected axis.
  • Skipping a translation-rotation connection: In rolling problems, solve for both the center-of-mass motion and angular motion when the question asks for acceleration, force, or speed.

When checking a practice solution, compare your setup before comparing your final number. A sign error, an incorrect axis, or an unjustified conservation law can produce a plausible-looking answer.

When to revisit

Return to this guide before a rotational-motion homework set, after learning a new conservation method, and during cumulative exam preparation. It is especially useful to revisit the formula table when a course moves from torque to energy or angular momentum, because the same object may be modeled with several valid methods.

Use this practical review routine:

  1. Rewrite the problem’s known values with units and identify the requested quantity.
  2. Sketch the object, axis, forces, and direction of rotation.
  3. Choose one primary method: torque, angular kinematics, energy, or angular-momentum conservation.
  4. Write the governing equation symbolically before inserting numbers.
  5. Check units, signs, limiting behavior, and whether the answer matches the stated assumptions.
  6. Record the error type if your answer is wrong: formula selection, diagram, algebra, units, or assumption.

Course expectations and exam formula sheets can change, so compare this reference with the syllabus or materials used in your class before a major assessment. For broader exam planning, pair rotational practice with the AP Physics exam prep plan or the physics formula sheet and equation finder. Reworking a small set of varied problems—one torque problem, one energy problem, one angular-momentum problem, and one rolling problem—will usually reveal which part of the decision process needs the most review.

Related Topics

#rotational motion#torque#angular momentum#moment of inertia#rolling motion#physics formulas
S

StudyPhysics Editorial Team

Physics Education Editors

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.